Release Agent for Stamped Concrete Systems - FH RELEASE AGENT

FH RELEASE AGENT

Description

FH RELEASE AGENT is a release agent, in powder form, colored, antique appearane that can be used for cement based stamped concrete hardener.

Fields of Application

• Allows easily leave the polyurethane mold from the stamped concrete surfaces.
• Applied on colored surface hardener to give antique effect.

Features and Benefits

• Creates antique effect and appearance.
• Creates a decorative and aesthetic appearance with different colors.
• Prevents the adhesion of concrete to the mold surface.
• Allows to transfer of mold figures precisely on concrete surface hardeners.
• Prevents the mold to wear and tear.

Application Procedure

Preparation of Substrate

FH RELEASE AGENT application must be started after finished the surface hardener application and polishing.

Application Method

FH RELEASE AGENT is spreaded on the surface hardener applied surface and done figured process with using molds. Depends on weathering conditions after 1 or 2 days later, surface must be washed with pressure water. Washed with high pressure water gives less antique appearane, on the contrary washed with low pressure water gives more deeply antique appearance.

Consumption

According to effect and figure on the surface; 0,200 - 0,400 kg/m²

Package

6 kg plastic bucket