Bitumen - Rubber Based Waterproofing Products / Bitumen-Rubber Based, Single Component, Super Elastic Liquid Membrane

SCHOUBIT PLAST 1K

Description

SCHOUBIT PLAST 1K is a bitumen-rubber based, ready-to-use, single-component liquid membrane with elastomeric additives that used for insulating water and damp. By the evaporation of the water it contains, it adheres firmly to the applied surface and forms a highly elastic waterproof layer.

Fields of Application

• In building foundations,
• In basement floors and walls,
• In retaining walls,
• In tunnels and channels,
• In closed roofs and verandas.

Features and Benefits

• Easy to apply.
• It provides a seamless insulation layer.
• As a water-based material it is environment friendly.
• Due to its non flammable and non-toxic characteristics it can be safely used in closed areas.
• It provides permanent elasticity.
• It is ready to use.
• As a cold applied material, it does not require heating or thinning.
• It can cover capillary cracks.
• Immediately applicable, there is no need to wait for the curing of the concrete.

Application Procedure

Preparation of Substrate

The application surface should be without dust, rust, dirt, grease and oil. The loose parts should be scrapped out. B PR 101 should be used on non-metallic surfaces, B PR 102 should be used on metallic surfaces as primer. The sharp corners or horizontal-vertical joints should be rounded and angled with PH 55.

Application Method

SCHOUBIT PLAST 1K is a cold applied and ready to use material, it does not need to dilution. It can be applied with a bitumen brush, airless pump or trowel. Depending on weather conditions, it dries in approximately 5-6 hours. It should not be applied in rainy weather, when the temperature below +5°C. Next layer should be applied on dry layer.

Consumption

1,0 - 1,5 kg/m² for each layer. Recommended at least 2 layers application.

Package

20 kg metal pail

Download Technical Details