Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

EPOX SL 800

Description

EPOX SL 800 is an epoxy based, two components, solvent-free, self-leveling floor coating that resistant to chemicals. It can be used also with added aggregate.

Fields of Application

Features and Benefits

Application Procedure

Preparation of Substrate

Application surface must be cleaned off from the contaminant such as dirt, dust, rust, oil etc. Application surface must be scraped to be ready for application.

Application Method

Surface must be primed with EPOX PR 100 solvent free primer. If needed, aggregate or primer+aggregate mixture can be used on between the coats. A and B components must be stirred under low speed mixture during 3-4 minutes until homogenous mixture is obtained. Mixture should be applied on the surface by using a trowel or roller. Spiked roller is used for preventing the foam on the surface. If needed, aggregate can be added on mixture. Application must be protected from water, direct sun light, wind, frost and rain at least 1 day.

Consumption

1,50-1,60 kg/m²/mm

Package

A component: 25 kg + B component: 5 kg = 30 kg set

Related Products
Our Products
Contact Us
address
Dursunköy Mah. Uygur Cad. No:44 34555
Hadımköy - Arnavutköy - İstanbul / TÜRKİYE
phone
info@baumerk.com