• Stamped Concrete Surface Hardener - FH STAMP Stamped Concrete Surface Hardener - FH STAMP

Flooring Systems / Stamped Concrete Surface Hardener

FH STAMP

Description

FH STAMP is a cement based, quartz aggregate, colored stamped concrete hardener that resistant to abrasion and chalking. It can be applied on fresh concrete surface as monolithic.

Fields of Application

  • On interior and exterior surfaces,
  • On concrete surfaces, floors, pavements, pedestrian and car roads.

Features and Benefits

  • Increases strength of stamped concrete surface and prevents the surface from chalking.
  • Creates colored and decorative surface.
  • Decreases absorbency of the applied surface.
  • Prevents flacking formed during freeze-thaw.

Application Procedure

Preparation of Substrate

Application must be started after disappear of the water on fresh concrete surface.

Application Method

Colored FH STAMP is spreaded approximately 4-5 kg/m² on the surface. It must be polished on the surface with using special trowel. After the coloring process is completed, waited until get plastic consistency by draining the water into the concrete. FH RELEASE AGENT antique effect powder are applied on whole surface to form a thin layer as 200 g/m² . After spread the FH RELEASE AGENT on the surface, polyurethane based decorative concrete molds are placed on the concrete surface consecutively and without any gap. Figure of the molds are transferred into the concrete with welting by a pounder. Depends on weathering conditions after 1 or 2 days later, firstly RELEASE AGENT is swept out and then surface must be washed with pressure water until get desired appearance. A part of the FH RELEASE AGENT is stayed into the joints and gaps during the application, it is formed an antique and natural appearance on the surface. Joints must be cut within 1-3 days. After get dry of the washed surface, FH SHINER is applied 2 layers with using roller or spray gun as 300-400 g/m² . Surface color and surface are protected from acid, base, solvents, chemicals and UV lights with this process.

Consumption

4 - 5 kg/m²

Package

25 kg kraft bag

Related Products

Our Products

Our Products

  • Epoxy-Coal Tar and Solvent Based Coating - EPOCOL 110

    Epoxy-Coal Tar and Solvent Based Coating - EPOCOL 110

  • Cement-Acrylic Based, Self-levelling High Performance Floor Coating - SELFING 315

    Cement-Acrylic Based, Self-levelling High Performance Floor Coating - SELFING 315

  • Epoxy Based, Two Component, Solvent Free Primer with Fillers - EPOX PR 200

    Epoxy Based, Two Component, Solvent Free Primer with Fillers - EPOX PR 200

  • Epoxy Based, Two Component, Solvent Free Floor and Wall Paint - EPOX FL 500

    Epoxy Based, Two Component, Solvent Free Floor and Wall Paint - EPOX FL 500

  • Epoxy Based, Two Component, Solvent Free Primer - EPOX PR 100

    Epoxy Based, Two Component, Solvent Free Primer - EPOX PR 100

  • Protective and Polisher Coating Material - FH SHINER

    Protective and Polisher Coating Material - FH SHINER

  • Styrene Resin Based, Curing Compound and Surface Protector - CURE R

    Styrene Resin Based, Curing Compound and Surface Protector - CURE R

  • Water Based, Epoxy Floor and Wall Coating - EPOX FL 600 W

    Water Based, Epoxy Floor and Wall Coating - EPOX FL 600 W

  • Cement Based, Self Levelling Flooring Compound (3-10 mm) - SELFING 600

    Cement Based, Self Levelling Flooring Compound (3-10 mm) - SELFING 600

  • Epoxy-Coal Tar Based, Solvent Free Coating - EPOCOL 220

    Epoxy-Coal Tar Based, Solvent Free Coating - EPOCOL 220

  • Acrylic Based, Concrete Curing Compound - CURE A

    Acrylic Based, Concrete Curing Compound - CURE A

  • Plywood Mold Release Agent - MD 150

    Plywood Mold Release Agent - MD 150

  • Surface Hardener and Shiner Material for Cement Based Surfaces - LH 130

    Surface Hardener and Shiner Material for Cement Based Surfaces - LH 130

  • Liquid Surface Hardener, Dusting Preventive and Polisher - LH 230

    Liquid Surface Hardener, Dusting Preventive and Polisher - LH 230

  • Corundum Aggregate, Concrete Surface Hardener - FH KORUND

    Corundum Aggregate, Concrete Surface Hardener - FH KORUND

  • Epoxy Based, Two Component, Solvent Free, Orange Peel Textured Topcoat Material - EPOX FL 700

    Epoxy Based, Two Component, Solvent Free, Orange Peel Textured Topcoat Material - EPOX FL 700

  • Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

    Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

  • Paraffin Wax Emulsion Based, Concrete Curing Compound - CURE P

    Paraffin Wax Emulsion Based, Concrete Curing Compound - CURE P

  • Mold Release Agent for Wood Mold - MD 100

    Mold Release Agent for Wood Mold - MD 100

  • Bonding Agent for Plaster on Fair Faced Concrete Surfaces - BRUT PR

    Bonding Agent for Plaster on Fair Faced Concrete Surfaces - BRUT PR

  • Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300

    Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300

  • Quartz Aggregate, Concrete Surface Hardener - FH QUARTZ

    Quartz Aggregate, Concrete Surface Hardener - FH QUARTZ

  • Steel Mold Release Agent - MD 200

    Steel Mold Release Agent - MD 200

  • Stamped Concrete Surface Hardener - FH STAMP

    Stamped Concrete Surface Hardener - FH STAMP

  • Release Agent for Stamped Concrete Systems - FH RELEASE AGENT

    Release Agent for Stamped Concrete Systems - FH RELEASE AGENT

  • Dusting Preventive and Surface Protection Material - LH 415

    Dusting Preventive and Surface Protection Material - LH 415

  • Polyurethane Based, Two Component, Solvent Free, Self-levelling Coating and Waterproofing Material - PURSELF 201

    Polyurethane Based, Two Component, Solvent Free, Self-levelling Coating and Waterproofing Material - PURSELF 201

Construction Chemicals