Joint Sealants and Mastics / Acrylic Polymer Based, Swelling Waterstop
SWELLBAND A is an acrylic polymer based sealing material that swell in contact with water.
Fields of Application
- On swimming pools,
- On water tanks,
- On water purifying system,
- On construction joints,
- On joint of curtain walls with building foundation,
- Where contact with the concrete of steel profiles and pipes,
- On PVC pipes of input and output as a water-retaining flange,
- Used to sealing arease that are exposed to sea water.
Features and Benefits
- Easy to apply.
- Applicable on wide range substrates.
- Easy application even with huge amount of rebar.
- Swelling occurs in a controlled. Does not swollen suddenly cast in concrete and does not damage the concrete.
- Allows the filling of possible gaps and create a water barrier in the reinforced concrete structure of the material with changing size by swelling.
- Resistant to highly salt water and various chemicals.
Preparation of Substrate
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions. SWELLBAND A should be protected from humidity and rain before the application.
Roll out required amount of SWELLBAND A, SUPER TACK 290 is placed in the middle of the joints and SWELLBAND A is glued on it and fixed on the surface. Place seams side by side or end to end; do not overlap. Make sure waterstop covers all parts of the surface, especially for surfaces which are not perfect in shape. Placed to concrete in a controlled. Protect the surface from water until placed the concrete. It is not suitable for the movement joints.
Depends on application areas.
5 mm x 20 mm - 20 m/box
10 mm x 20 mm - 10 m/box
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
Bitumen-Neoprene Based, Joint Paste - NPR 2
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
TPE Based, Elastic Dilatation Tape - TPE FLEX
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
Bentonite Based, Swelling Waterstop - SWELLBAND
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
Primer for Polysulphide Based Materials - PS PRIMER
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
Bituminous, Elastic Waterstop Tape - FLEXBIT
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
Bitumen Based, Elastic Fillet Tape - PH 55