Joint Sealants and Mastics / Epoxy Based, Two Component, Adhesive Mortar
EPOX 220 is an epoxy based, solvent free, two component installation and adhesive mortar with thixotropic behavior.
Fields of Application
- To adhere TPE FLEX dilatation band.
- Bonding of metal profiles to concrete or steel parts.
- To adhere ceramic, granite or marble plate.
- To adhere concrete, stone, metal, wood and many other building products.
- To repair cracks.
Features and Benefits
- Quick dry.
- Solvent free. Suitable for interior and exterior areas.
- Due to the excellent adhesion property, adhere different kind of surfaces such as concrete, stone, metal, wood, ceramic, granite, marble etc.
- Thixotropic behavior prevents sagging on vertical wall and ceiling.
Preparation of Substrate
Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and removed loose pieces. Cracks and pores must be repaired with EPOX 220 or other BAUMERK repair mortars.
A and B components must be stirred under low speed mixture during 2-3 minutes until homogenous mixture is obtained.
To adhere dilatation tape; EPOX 220 is applied on both sides of the dilation approximately 1,5 mm thickness and 40 mm width by trowel or spatula. After lay the dilatation tape, EPOX 220 is applied on the front face and press until curing.
To adhere metal profile; EPOX 220 is applied on both side of the surface and press until curing.
To adhere ceramic, granite or marble plate; EPOX 220 is applied with using a notched trowel and plates are installed. Recent position must be set within 30 minutes.
Approximately 2 kg/meter for fixing dilatation tape.
A component: 3,75 kg + B component: 1,25 kg = 5 kg set
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
Bitumen-Neoprene Based, Joint Paste - NPR 2
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
TPE Based, Elastic Dilatation Tape - TPE FLEX
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
Bentonite Based, Swelling Waterstop - SWELLBAND
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
Primer for Polysulphide Based Materials - PS PRIMER
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
Bituminous, Elastic Waterstop Tape - FLEXBIT
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
Bitumen Based, Elastic Fillet Tape - PH 55