Joint Sealants and Mastics / Polysulphide Based, Two Component, Pouring Grade Joint Sealant
JOINTPAST PS-H is a polysulphide based, two component, and highly elastic pouring grade joint sealant. It can be applied up to 40 mm to 150 mm.
Fields of Application
- Suitable for horizontal and vertical applications.
- In building dilatation.
- In joints of gas stations, harbors, ports, airports.
- In joints of prefabricated elements, industrial floors, car park and garage.
Features and Benefits
- Self levelling due to the liquid property.
- High elasticity.
- Resistant to vehicle traffic.
- Resistant to mechanical impact, UV and abrasion.
- Resistant to water, salt, benzene, fuel, oil etc. Can be used on gas stations.
- Resistant to plant root.
Preparation of Substrate
The application surfaces must be durable, sound, dry, clean and free from dirt, dust, and oil and grease. If it is necessary surface is primed with PS PRIMER. Depth of the joint is adjusted with using polyethylene backer rod or a similar material. Depth must not exceed the width of the joint.
A and B components must be stirred under low speed mixture during 2-3 minutes until homogenous mixture is obtained. Joint depth must be adjusted using appropriate profiles to save material. It is necessary to use primer material to improve adhesion.
With 1 kg PS-H, through the linear joint length metrically - 1,45 kg/lt
4 kg set
2,5 lt set
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
Bitumen-Neoprene Based, Joint Paste - NPR 2
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
TPE Based, Elastic Dilatation Tape - TPE FLEX
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
Bentonite Based, Swelling Waterstop - SWELLBAND
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
Primer for Polysulphide Based Materials - PS PRIMER
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
Bituminous, Elastic Waterstop Tape - FLEXBIT
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
Bitumen Based, Elastic Fillet Tape - PH 55