Joint Sealants and Mastics / Polyurethane-Bitumen Based, Two Component, Joint Sealant
PUB 401
Description
PUB 401 is a polyurethane-bitumen based, two component, self-levelling, cold applicable dilatation and joint sealant material.
Fields of Application
It is applied on horizontal dynamic dilatations and joints for water impermeability and filling.
Features and Benefits
- It is elastic. It keeps its elasticity between -20°C and +120°C.
- It is cold applicable product. Provides easy and fast application.
- It is durable against abrasion and aged.
- It has excellent mechanical and chemical resistance.
- It is self levelling.
- Excellent adhesion on the applied surfaces.
Application Procedure
Preparation of Substrate
The surface must be dry and clean before application. All joints before filling shall be carefully cleaned by metal brushing or sanding. The dust should be removed by pressured air. PUB 401 causes foaming when applied on moist surfaces.
Application Method
Component A and B is mixed under low speed mixer until homogenous mixture obtained. Mixture must be used within 30 minutes. Otherwise gelling occurs and it cannot be recovered. PUB 401 must be used only on horizontal joints. The application surface should be protected from water minimum 6 - 8 hours.
Consumption
1,30 kg/lt
Package
A component + B component = 5 kg set
Related Products

Our Products
-
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
-
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
-
Bitumen-Neoprene Based, Joint Paste - NPR 2
-
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
-
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
-
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
-
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
-
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
-
TPE Based, Elastic Dilatation Tape - TPE FLEX
-
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
-
Bentonite Based, Swelling Waterstop - SWELLBAND
-
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
-
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
-
Primer for Polysulphide Based Materials - PS PRIMER
-
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
-
Bituminous, Elastic Waterstop Tape - FLEXBIT
-
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
-
Bitumen Based, Elastic Fillet Tape - PH 55