Cement Based, Repair Mortar and Finishing Coat - REPAMERK 2

Cement Based, Repair Mortar and Finishing Coat - REPAMERK 2

REPAMERK 2

Description

REPAMERK 2 is cement based, one component, polymer and fiber modified repair mortar for finishing the concrete surfaces.

Fields of Application

Features and Benefits

Application Procedure

Preparation of Substrate

Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. If there is a water leakage, it must be drained or properly plugged. Concrete surfaces must be saturated with water before application. Defects up to 4 cm depth should be repaired with REPAMERK 301.

Application Method

25 kg REPAMERK 2 is mixed with 4,75 – 5,0 liters water under low speed mixer for 3-4 minutes until obtaining homogenous mixture. Mixture should be applied in 30 minutes at 20°C. REPAMERK 2 is applied with a trowel as 1-5 mm thickness. If required more smooth finish, water should be sprayed onto the mortar and the surface should be finished with using steel or wooden trowel. Application surface must be protected from the rain, wind,frost etc. during first 24-48 hours after finishing repair.

Consumption

For 1 mm thickness approximately 1,70 kg/m² powder is required.

Package

25 kg kraft bag

Related Products
Our Products
Contact Us
address
Dursunköy Mah. Uygur Cad. No:44 34555
Hadımköy - Arnavutköy - İstanbul / TÜRKİYE