Repair and Reinforcement Systems / Epoxy Based, Two Component, Solvent Free, Adherence Between Old and New Concrete
EPOX 311 is an epoxy based, two component, adherence bridge between old and new concrete, solvent free adhesive.
Fields of Application
- Concrete, natural stone, brick, wood, steel and metal surface,
- Adhesion between old and new concrete,
- Stabilizing the windows and doors,
- Bonding ceramic, tiles, granites on surfaces.
Features and Benefits
- Excellent adhesion on concrete and steel.
- Solvent free.
- Has high load carrying capacity.
- Excellent mechanical and chemical resistance.
- Can be applied without primer.
- Cannot be affected instant temperature changes.
Preparation of Substrate
Application surface must be dry, sound, fully cured, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Surface must be roughened mechanically by blasting, milling or sanding before application.
Component A and B are stirred separately under low speed mixer, then Component B is poured into the Component A and mixed together for 3-4 minutes until obtaining homogenous mixture. Mixture must be applied in 30 minutes. Mixture should be applied on the surface with using a trowel or spatula as 0,5 - 1 mm thickness. Parts should to be bonded to each other by pressing them and waited stably until curing the adhesive. The product would be completely cured in minimum 7 days. During the application, ambient and surface temperatures should be between +10⁰C and +30⁰C. It is not recommended to application on rainy, windy and frost days. After application, the material should be protected from direct contact with water for a minimum 24 hours.
A component: 5 kg + B component: 2,5 kg = 7,5 kg set
Polyester Based Chemical Anchor - POLY 308
Epoxy Based, Two Component, Solvent-Free, Anchoring and Adhesive Mortar - EPOX 305
Cement Based, Flowable and Fast Setting Grout Mortar - GRT 25
Cement Based Grouting Mortar - GRT 20
Cement Based, Repair Mortar and Finishing Coat - REPAMERK 2
Polyurethane Based, Two Component, Injection Resin - PUR IN 24
Cement Based, Structural Repair Mortar - REPAMERK 301
Corrosion Protection and Bonding Agent Mortar - REPAMERK 325
Epoxy Based, 3 Component, Solvent-free, Repairing and Filling Mortar - EPOX 310
Epoxy - Acrylate Based Chemical Anchor - EPOX 307
Cement Based, Repair Mortar for Non-Structural Repairs - REPAMERK 1
Epoxy Based, Two Component, Solvent Free, Adherence Between Old and New Concrete - EPOX 311
Mold (Fungus) Preventive Impregnation Primer - WALL CL 100
Reinforcing Purpose, Epoxy Based Injection System - EPOX IN 25