Repair and Reinforcement System / Polyester Based Chemical Anchor
POLY 308 is a polyester based, two component chemical anchor.
Fields of Application
- Suitable for fastening iron of masonry structure on concrete, marbles and perforated bricks.
- Using for general purposes, for example fixing of gates, balustrades, roller blinds, panes, antennas, consoles, cable trays etc.
Features and Benefits
- Cures quickly.
- Easy to apply.
- Highly resistant to chemicals.
- Can be applied on moisture surfaces.
- Remains the color.
Preparation of Substrate
Holes or channels must be drilled into the existing concrete. Dust in these holes or channels must be removed.
Remove the cap of the cartridge and cut the foil. Place the static mixer on the top of the cartridge. Place the product in standard cartridge gun. Drill a hole suitable diameter for the anchorage rod (by using a driller) Clean the hole from dust, grease and dirt by using a brush or air flow. Dispense the product until it becomes completely grey (about 10–15 cm) and don’t use unmixed part. The product is filled until 2/3 of the hole. Place the anchorage rod to be fastened rotating. Product’s curing must complete for service to open.
Depends on usage area.
300 ml cartridge 345 ml cartridge
Polyester Based Chemical Anchor - POLY 308
Epoxy Based, Two Component, Solvent-Free, Anchoring and Adhesive Mortar - EPOX 305
Cement Based, Flowable and Fast Setting Grout Mortar - GRT 25
Cement Based Grouting Mortar - GRT 20
Cement Based, Repair Mortar and Finishing Coat - REPAMERK 2
Polyurethane Based, Two Component, Injection Resin - PUR IN 24
Cement Based, Structural Repair Mortar - REPAMERK 301
Corrosion Protection and Bonding Agent Mortar - REPAMERK 325
Epoxy Based, 3 Component, Solvent-free, Repairing and Filling Mortar - EPOX 310
Epoxy - Acrylate Based Chemical Anchor - EPOX 307
Cement Based, Repair Mortar for Non-Structural Repairs - REPAMERK 1
Epoxy Based, Two Component, Solvent Free, Adherence Between Old and New Concrete - EPOX 311
Mold (Fungus) Preventive Impregnation Primer - WALL CL 100
Reinforcing Purpose, Epoxy Based Injection System - EPOX IN 25