Terrace, Balcony and Wet-Damp Floor Waterproofing Products / UV Resistant, Acrylic-Based, Waterproofing and Heat Insulation Material
SOLARCOAT is UV resistant, acrylic based, single component, elastic waterproofing and heat insulation material that used for reducing the interior temperature of the buildings with reflecting radiant heat energy and minimize the surface temperature with its micro-spherical particles. Through heat ceramic micro-spheres contained in the product, the protection system provides energy saving up to 25-30%. The sun’s rays reflecting back 95%. The UV’s rays reflecting back 85%.
Fields of Application
- In roofs and walls of buildings.
- In concrete, plaster, stone, metal, brick, wood and decorative coating.
- In exterior surfaces under influence of marine areas.
Features and Benefits
- Single-component ready to use, easy to apply.
- Water-based, non-toxic and non-flammable.
- Reduces interior temperature of the residences and cuts down costs by reducing energy. consumption in cooling.
- High adhesion performance.
- Prevents mold and fungus forming.
- Forms crack bridging and protects elasticity.
- Resistant to UV lights.
Preparation of Substrate
The application surface must be clean and dry and free from grease, rust, dirt, mold, etc. Cracks and loose parts must be repaired. For obtain better adhesion, surface should be sanded. Surface should be primed with using SPR 104, for better adhesion and saturation of high absorbent surface. Metal surface should be primed with anti-rust primers.
Application surface should be primed with proper primer and then waited drying. SOLARCOAT should be applied with brush, roller or airless spray gun as two or more layers. Waited 4-8 hours between the coats. After the application of last coat, surface should be dried within 24 hours and protected from direct sun light, wind, frost and rain in this time. In large areas, surface should be divided by masking tape to obtain more uniform appearance.
1,30 - 1,80 kg/m² for 2 layers.
20 kg plastic bucket
UV Resistant, Acrylic-Based, Waterproofing and Heat Insulation Material - SOLARCOAT
Acrylic Based, Multipurpose Primer - SPR 104
Polyurethane Based, Transparent, Waterproofing Material - PUR 115
Standard Pure Polyurea - PUR 425
Hybrid Polyurea - PUR 410
Polyurethane Based, Waterproofing Material for Potable Water Tanks - POLIXA 2
Polyurethane Based, Bitumen Modified, Single Component, Liquid Waterproofing Material - PU-B 1K
Polyurethane - Bitumen Based, Two Component, Liquid Waterproofing Material - PU-B 2K
Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115
Water Based, Transparent Waterproofing and Impregnating Material - TRANSCOAT
Elastomeric Acrylic Resin Based, UV Resistant, Elastic Waterproofing Material - WHITECOAT
Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material - WHITECOAT SP
Polyurethane Based, UV Resistant, One Component, Waterproofing Material - PUR 625
Modified Pure Polyurea - PUR 426
Polyurethane Based, Two Component, Aliphatic Top Coat - PU TOP 210
One Component, Polyurethane Concrete Primer - PU 101 A
Hybrid-Polymer Based, One Component, Waterproofing Material - HYBRID 120
Invisible Water Repellent and Surface Impregnating Material - SILOX