Complementary Products / Butyl Rubber Based, Self Adhesive Tape
It is a butyl rubber based self adhesive tape that can be produced one side or both side with adhesive. PH SELF with one side coated non-woven: rigid in main direction, thin, high tenacity. Butyl rubber tape with release liner with overlaps for easy removal. The non-woven allows a good cementability with common tile adhesives or sealants, structure embossing.
Fields of Application
It is used with tiles or natural stones for waterproofing of expansion joints, wet areas, corners of indoor or outdoor, waterproofing for joints etc.
Preparation of Substrate
The application surface should be without dust, rust, dirt, grease and oil and the loose parts should be scrapped out.
Joint sealing tape to be applied with tiles or natural stones for flexible waterproofing of expansion joints. Suitable for indoor application for medium loads of non-pressurized water.
Thickness : from 1 mm to 3 mm Width : from 25 mm to 250 mm Length : 10 m, 20 m
Concrete Reinforcement Fiber - FIBER
Bitumen Based, Self Adhesive, Waterproofing Tape - B-SELF TAPE AL
Waterproofing Tape with Non-woven - PH 127 K
Waterproofing Tape with Fabric - PH 127
HDPE Based, Protective Drainage Dimple Board - DRAIN-B
Backer Rod for Joints - B-ROD
Butyl Rubber Based, Self Adhesive Tape - PH SELF
Aluminum Based, Isolation Pressure Profile - PROFILE AL
PVC Based Waterstops - PVC WATERSTOP
Non-Woven Polyester and PolypropyIene Geotextile - GEOTEXTILE
Root Inhibitive Foil - LDPE MEMBRANE