• Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300 Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300

Flooring Systems / Epoxy Based, Two Component, Moisture Tolerant Primer

EPOX PR 300

Description

EPOX PR 300 is an epoxy resin based, two component, low viscosity, high adhesion performance even though on moist concrete and mineral surfaces, solvent free impregnation primer.

Fields of Application

  • For indoor and outdoor applications,
  • On moist surfaces,
  • On concrete and cement based mineral surfaces,
  • Used as a primer before BAUMERK epoxy and polyurethane floor systems,
  • Used for binding epoxy based mortars and mortar screeds,
  • Used as filler and repair mortar when mixed with aggregate.

Features and Benefits

  • Applied on horizontal and vertical applications.
  • Solvent free, safely used in interior surfaces.
  • Excellent penetration ability due to low viscosity behavior.
  • Has high chemical resistance.
  • Easy to apply.

Application Procedure

Preparation of Substrate

Application surface must be cleaned off from the contaminant such as dirt, dust, rust, oil etc. Application surface must be scraped to be ready for application.

Application Method

Component A is stirred under low speed drill, then epoxy hardener, component B is added into the component A and mixed together under low speed mixer during 3-4 minutes until homogenous mixture is obtained. For primer applications, prepared mixture is applied on the surface by using roller, brush, trowel or squeegee. It can be used as mortar after mixed with aggregate Application must be done within 30 minutes. According to weathering conditions waiting period between the coats is 10-48 hours. Final curing is done after 7 days. Surface must be protected from water and rain during 24 hours after application.

Consumption

0,200 - 0,500 kg/m²

Package

A component: 16 kg + B component: 8 kg = 24 kg set

Related Products

Our Products

Our Products

  • Epoxy-Coal Tar and Solvent Based Coating - EPOCOL 110

    Epoxy-Coal Tar and Solvent Based Coating - EPOCOL 110

  • Cement-Acrylic Based, Self-levelling High Performance Floor Coating - SELFING 315

    Cement-Acrylic Based, Self-levelling High Performance Floor Coating - SELFING 315

  • Epoxy Based, Two Component, Solvent Free Primer with Fillers - EPOX PR 200

    Epoxy Based, Two Component, Solvent Free Primer with Fillers - EPOX PR 200

  • Epoxy Based, Two Component, Solvent Free Floor and Wall Paint - EPOX FL 500

    Epoxy Based, Two Component, Solvent Free Floor and Wall Paint - EPOX FL 500

  • Epoxy Based, Two Component, Solvent Free Primer - EPOX PR 100

    Epoxy Based, Two Component, Solvent Free Primer - EPOX PR 100

  • Protective and Polisher Coating Material - FH SHINER

    Protective and Polisher Coating Material - FH SHINER

  • Styrene Resin Based, Curing Compound and Surface Protector - CURE R

    Styrene Resin Based, Curing Compound and Surface Protector - CURE R

  • Water Based, Epoxy Floor and Wall Coating - EPOX FL 600 W

    Water Based, Epoxy Floor and Wall Coating - EPOX FL 600 W

  • Cement Based, Self Levelling Flooring Compound (3-10 mm) - SELFING 600

    Cement Based, Self Levelling Flooring Compound (3-10 mm) - SELFING 600

  • Epoxy-Coal Tar Based, Solvent Free Coating - EPOCOL 220

    Epoxy-Coal Tar Based, Solvent Free Coating - EPOCOL 220

  • Acrylic Based, Concrete Curing Compound - CURE A

    Acrylic Based, Concrete Curing Compound - CURE A

  • Plywood Mold Release Agent - MD 150

    Plywood Mold Release Agent - MD 150

  • Surface Hardener and Shiner Material for Cement Based Surfaces - LH 130

    Surface Hardener and Shiner Material for Cement Based Surfaces - LH 130

  • Liquid Surface Hardener, Dusting Preventive and Polisher - LH 230

    Liquid Surface Hardener, Dusting Preventive and Polisher - LH 230

  • Corundum Aggregate, Concrete Surface Hardener - FH KORUND

    Corundum Aggregate, Concrete Surface Hardener - FH KORUND

  • Epoxy Based, Two Component, Solvent Free, Orange Peel Textured Topcoat Material - EPOX FL 700

    Epoxy Based, Two Component, Solvent Free, Orange Peel Textured Topcoat Material - EPOX FL 700

  • Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

    Epoxy Based, Two Component, Solvent Free, Self-levelling Coating Material - EPOX SL 800

  • Paraffin Wax Emulsion Based, Concrete Curing Compound - CURE P

    Paraffin Wax Emulsion Based, Concrete Curing Compound - CURE P

  • Mold Release Agent for Wood Mold - MD 100

    Mold Release Agent for Wood Mold - MD 100

  • Bonding Agent for Plaster on Fair Faced Concrete Surfaces - BRUT PR

    Bonding Agent for Plaster on Fair Faced Concrete Surfaces - BRUT PR

  • Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300

    Epoxy Based, Two Component, Moisture Tolerant Primer - EPOX PR 300

  • Quartz Aggregate, Concrete Surface Hardener - FH QUARTZ

    Quartz Aggregate, Concrete Surface Hardener - FH QUARTZ

  • Steel Mold Release Agent - MD 200

    Steel Mold Release Agent - MD 200

  • Stamped Concrete Surface Hardener - FH STAMP

    Stamped Concrete Surface Hardener - FH STAMP

  • Release Agent for Stamped Concrete Systems - FH RELEASE AGENT

    Release Agent for Stamped Concrete Systems - FH RELEASE AGENT

  • Dusting Preventive and Surface Protection Material - LH 415

    Dusting Preventive and Surface Protection Material - LH 415

  • Polyurethane Based, Two Component, Solvent Free, Self-levelling Coating and Waterproofing Material - PURSELF 201

    Polyurethane Based, Two Component, Solvent Free, Self-levelling Coating and Waterproofing Material - PURSELF 201

Construction Chemicals