Joint Sealants and Mastics / Bituminous Waterproofing and Adhesion Mastic
BMAST DF 310
Description
Bitumen-rubber based, elastic mastic used for waterproofing, repairing and adhesion purposes. BMAST DF 310 is economic mastic designed for dry surfaces.
Fields of Application
- Used at intersection joint gaps and chimney bottoms for waterproofing, filling and repairing.
- Used for waterproofing roof windows as well as ventilation, antenna and pipe outlets.
- Used for adhering, installing and repairing bituminous membranes.
- Used for adhering and repairing bituminous shingles.
Features and Benefits
- Used in wide range of areas like bituminous membranes, shingled asphalt-based materials, concrete, bricks, wood, metals etc.
- Ready to use. Cold applied.
- Does not sagging.
- Protects its elasticity under cold weathering conditions.
Application Procedure
Preparation of Substrate
Surface must be dry and clean before application. Any loose pieces, dust, oil, grease should be removed.
Application Method
Cut out tip of the cartridge according to the width of the seam. After squeezed BMAST DF 310 into the joint gap, smooth the surface with a moist spatula within 10 - 15 minutes. After 10 - 15 minutes following product is applied onto a surface, it should be connected to the other surface for adhesion process.
Consumption
Depends on application surface area.
Package
310 ml cartridge
25 cartridges/box
Related Products

Our Products
-
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
-
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
-
Bitumen-Neoprene Based, Joint Paste - NPR 2
-
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
-
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
-
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
-
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
-
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
-
TPE Based, Elastic Dilatation Tape - TPE FLEX
-
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
-
Bentonite Based, Swelling Waterstop - SWELLBAND
-
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
-
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
-
Primer for Polysulphide Based Materials - PS PRIMER
-
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
-
Bituminous, Elastic Waterstop Tape - FLEXBIT
-
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
-
Bitumen Based, Elastic Fillet Tape - PH 55