Complementary Products / Bitumen Based, Self Adhesive, Waterproofing Tape
B-SELF TAPE AL
B-SELF TAPE AL is a bitumen based, cold applicable, one side coated with aluminum foil or colored mineral, other side is adhesive waterproofing tape.
Fields of Application
It provides waterproofing with adhering on different substrates such as wood, metal, glass, plaster, concrete etc.
- Aluminum foil and mineral coated top surface provides UV resistance.
- Applied easily even though inclined surface because of elasticity.
- Convenient with bituminous system.
- Self adhesive.
- Easy to applied.
- Applicable on wide range substrates.
Preparation of Substrate
Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. High absorbent surfaces such as concrete, plaster, chipboard must be primed with B PR 101 bituminous based primer.
Peel the removable film layer of B-SELF TAPE AL and pressed firmly sticky surface on substrate. Tape should be fully contact with the substrate by pressing its every point on application surface.
Width: 10-15-20-30 cm
Length: 10 m
Concrete Reinforcement Fiber - FIBER
Bitumen Based, Self Adhesive, Waterproofing Tape - B-SELF TAPE AL
Waterproofing Tape with Non-woven - PH 127 K
Waterproofing Tape with Fabric - PH 127
HDPE Based, Protective Drainage Dimple Board - DRAIN-B
Backer Rod for Joints - B-ROD
Butyl Rubber Based, Self Adhesive Tape - PH SELF
Aluminum Based, Isolation Pressure Profile - PROFILE AL
PVC Based Waterstops - PVC WATERSTOP
Non-Woven Polyester and PolypropyIene Geotextile - GEOTEXTILE
Root Inhibitive Foil - LDPE MEMBRANE