Joint Sealants and Mastics / Bituminous Waterproofing and Adhesion Mastic for Wet Areas
BMAST WF 310
Bitumen-rubber based, elastic mastic used for waterproofing, repairing and adhesion purposes. BMAST WF 310 is applied in rainy weather and provides excellent adhesion on wet and underwater surfaces due to the special formulation.
Fields of Application
- Used at intersection joint gaps and chimney bottoms for waterproofing, filling and repairing.
- Used for waterproofing roof windows as well as ventilation, antenna and pipe outlets.
- Used to adhere, install and repair bituminous membranes.
- Used to adhere and repair bituminous shingles.
Features and Benefits
- Applicable in rainy days.
- Shows excellent adhesion on damp and underwater areas.
- Used in wide range of areas like bituminous membranes, shingled asphalt-based materials, concrete, bricks, wood, metals etc.
- Ready to use. Cold applied.
- Does not sagging.
- Protects its elasticity under cold weathering conditions.
Preparation of Substrate
Surface must be clean before application. Any loose pieces, dust, oil, grease should be removed.
Cut out tip of the cartridge according to the width of the seam. After squeezed BMAST WF 310 into the joint gap, smooth the surface with a moist spatula within 10 - 15 minutes. After 10 - 15 minutes following product is applied onto a surface, it should be connected to the other surface for adhesion process.
Depends on application surface area.
310 ml cartridge
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
Bitumen-Neoprene Based, Joint Paste - NPR 2
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
TPE Based, Elastic Dilatation Tape - TPE FLEX
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
Bentonite Based, Swelling Waterstop - SWELLBAND
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
Primer for Polysulphide Based Materials - PS PRIMER
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
Bituminous, Elastic Waterstop Tape - FLEXBIT
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
Bitumen Based, Elastic Fillet Tape - PH 55