Joint Sealants and Mastics / Polysulphide Based, Two Component, Gun Grade Joint Sealant
JOINTPAST PS-V
Description
JOINTPAST PS-V is a polysulphide based, two component, and highly elastic gun grade joint sealant. It can be applied up to 40 mm to 150 mm.
Fields of Application
- Suitable for horizontal and vertical applications. Prevents sagging.
- In building dilatation.
- In joints of basement and curtain walls.
- In joints of gas stations.
- In joints of prefabricated elements, industrial floors, car park and garage.
Features and Benefits
- Prevents sagging due to pasty like viscosity.
- High elasticity.
- Resistant to vehicle traffic.
- Resistant to mechanical impact, UV and abrasion.
- Resistant to water, salt, benzene, fuel, oil etc. Can be used on gas stations.
- Resistant to plant root.
Application Procedure
Preparation of Substrate
The application surfaces must be durable, sound, dry, clean and free from dirt, dust, and oil and grease. If it is necessary surface is primed with PS PRIMER. Depth of the joint is adjusted with using polyethylene backer rod or a similar material. Depth must not exceed the width of the joint.
Application Method
A and B components must be stirred under low speed mixer during 2-3 minutes until homogenous mixture is obtained. Mixture should be applied with using special mastic gun. Joint depth must be adjusted using appropriate profiles to save material. It is necessary to use primer material to improve adhesion.
Consumption
With 1 kg PS-V, through the linear joint length metrically - 1,60 kg/lt
Package
3,5 kg set
2,5 lt set
Related Products

Our Products
-
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
-
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
-
Bitumen-Neoprene Based, Joint Paste - NPR 2
-
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
-
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
-
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
-
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
-
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
-
TPE Based, Elastic Dilatation Tape - TPE FLEX
-
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
-
Bentonite Based, Swelling Waterstop - SWELLBAND
-
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
-
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
-
Primer for Polysulphide Based Materials - PS PRIMER
-
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
-
Bituminous, Elastic Waterstop Tape - FLEXBIT
-
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
-
Bitumen Based, Elastic Fillet Tape - PH 55