Terrace, Balcony and Wet-Damp Floor Waterproofing Products / Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material
WHITECOAT SP is an elastomeric resin based, single component, ready to use, super elastic water insulation material.
Fields of Application
- In flat or inclined roof.
- In water insulation in old - new terrace roofs.
- In terrace, balcony, rain gutter, strainer, draining board, canals, chimney surroundings and undercoating insulation of the wet areas.
Features and Benefits
- Single component.
- Ready to use, easy to apply.
- Protects elasticity under low temperatures.
- UV resistant.
- Permits water vapour to the surface.
- Can be painted with acrylic paint.
- Colourized with water based pigment paste.
Preparation of Substrate
The application surface must be dry, sound, mainly smooth, clean and clear of materials which prevent bonding, such as oil, rust, paint, silicone, curing agents, detergents and paraffin wax. Surface defects and voids should be repaired with suitable REPAMERK repair mortars. Steel surfaces should be primed with suitable anti-corrosion material before application. WHITECOAT SP diluted to 25-30% or SPR 104 acrylic primer should be used as a primer on surfaces like eternit, foamed blocks, brick, tile, masonry, concrete and plaster.
WHITECOAT SP is applied on the substrate by brush, roller or spray as two or three layers. Brush application direction in each layer must be perpendicular to each other. Minimum 4 - 5 hours should be waited between the layers. This product is not suitable on its own for waterproofing against hydrostatic pressure. It is recommended to reinforce the vertical and horizontal joints of excessively cracked surfaces by using geotextile protection layer or fibermesh.
0,75 kg/m² per layer for vertical, 1,0 - 1,5 kg/m² per layer for horizontal places. Recommended at least 2 layers application.
20 kg plastic bucket
UV Resistant, Acrylic-Based, Waterproofing and Heat Insulation Material - SOLARCOAT
Acrylic Based, Multipurpose Primer - SPR 104
Polyurethane Based, Transparent, Waterproofing Material - PUR 115
Standard Pure Polyurea - PUR 425
Hybrid Polyurea - PUR 410
Polyurethane Based, Waterproofing Material for Potable Water Tanks - POLIXA 2
Polyurethane Based, Bitumen Modified, Single Component, Liquid Waterproofing Material - PU-B 1K
Polyurethane - Bitumen Based, Two Component, Liquid Waterproofing Material - PU-B 2K
Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115
Water Based, Transparent Waterproofing and Impregnating Material - TRANSCOAT
Elastomeric Acrylic Resin Based, UV Resistant, Elastic Waterproofing Material - WHITECOAT
Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material - WHITECOAT SP
Polyurethane Based, UV Resistant, One Component, Waterproofing Material - PUR 625
Modified Pure Polyurea - PUR 426
Polyurethane Based, Two Component, Aliphatic Top Coat - PU TOP 210
One Component, Polyurethane Concrete Primer - PU 101 A
Hybrid-Polymer Based, One Component, Waterproofing Material - HYBRID 120
Invisible Water Repellent and Surface Impregnating Material - SILOX