EPOX FL 500 is an epoxy resin based, two component, solvent free paint for floor and wall.
Preparation of Substrate
Application surface must be cleaned off from the contaminant such as dirt, dust, rust, oil etc. Application surface must be scraped to be ready for application.
Surface must be primed with EPOX PR 100 solvent-free primer. If needed, EPOX 310 should be used for repairing or filling mortar. A and B components must be stirred under low speed mixture during 3-4 minutes until homogenous mixture is obtained. Prepared mixture can be applied on the primed surface by using roller or spray machine as two-three layers. Surface must be protected from water and rain during 24 hours after application.
0,200 - 0,500 kg/m² for each coat.
A component: 26 kg + B component: 4 kg = 30 kg set