Terrace, Balcony and Wet-Damp Floor Waterproofing Products / Hybrid Polymer Based, One Component, Transparent Waterproofing Material
HYBRID 115 is a hybrid-polymer based, applicable from negative and positive directions, one component, transparent solvent free waterproofi ng material. HYBRID 115 is a UV resistance, crack bridging property coating material that can be applied even wet surfaces, without primer.
Fields of Application
- Can be applied on wide variety of surfaces such as concrete, metal, ceramic, aluminum, wood, granite, bituminous, asphalt based surface etc.
- On terrace and balconies that exposed on heavy pedestrian traffi c.
- On interior and exterior surface of basement.
- For repairing surface cracks up to 5 mm.
- Under ceramic waterproofing.
- On concealed gutters.
Features and Benefits
- No need to primer application.
- Fast cured.
- Protects its performance even at low temperature.
- Has high UV and chemical resistance.
- Has high acid and base resistance.
- Can be applied on wet surfaces.
Preparation of Substrate
Surface must be clean off materials which prevent adhesion such as dust, oil etc. Application surface must be sound and surface defects must be repaired. Smooth, gloss or/and nonabsorbent surfaces must be roughened. On ceramic surface application, material adhesion performance must be checked on surface before the application, the sound of joint material must be checked and if needed they must be repaired. Wall fl oor joints must be chambered.
Material is ready to used. Application is done with using brush, roller or airless spray gun at least two coats. Second coat must be applied perpendicularly after 12-24 hours later (be walkable on) on fi rst coat.
For concrete 1,0 kg/m²/mm
For ceramic 1,5 kg/m²/mm
For metal 1,0 kg/m²/mm
1 kg plastic bucket 4,5 kg plastic bucket
UV Resistant, Acrylic-Based, Waterproofing and Heat Insulation Material - SOLARCOAT
Acrylic Based, Multipurpose Primer - SPR 104
Polyurethane Based, Transparent, Waterproofing Material - PUR 115
Standard Pure Polyurea - PUR 425
Hybrid Polyurea - PUR 410
Polyurethane Based, Waterproofing Material for Potable Water Tanks - POLIXA 2
Polyurethane Based, Bitumen Modified, Single Component, Liquid Waterproofing Material - PU-B 1K
Polyurethane - Bitumen Based, Two Component, Liquid Waterproofing Material - PU-B 2K
Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115
Water Based, Transparent Waterproofing and Impregnating Material - TRANSCOAT
Elastomeric Acrylic Resin Based, UV Resistant, Elastic Waterproofing Material - WHITECOAT
Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material - WHITECOAT SP
Polyurethane Based, UV Resistant, One Component, Waterproofing Material - PUR 625
Modified Pure Polyurea - PUR 426
Polyurethane Based, Two Component, Aliphatic Top Coat - PU TOP 210
One Component, Polyurethane Concrete Primer - PU 101 A
Hybrid-Polymer Based, One Component, Waterproofing Material - HYBRID 120
Invisible Water Repellent and Surface Impregnating Material - SILOX