Terrace, Balcony and Wet-Damp Floor Waterproofing Products / Polyurethane Based, Two Component, Aliphatic Top Coat
PU TOP 210
PU TOP 210 is a two component, aliphatic polyurethane based, interior and exterior top coat for concrete and metal surfaces, low viscosity, UV resistant, featuring a glossy or matt surface appearance, self levelling coating.
Fields of Application
- In wet volumes such as terrace, balcony, roofs etc.
- On concrete and metal surfaces.
- On polyurethane, polyurea and epoxy coated surfaces.
- On exterior surfaces as top coat because of UV resistant.
- For outdoor and indoor swimming pools.
Features and Benefits
- UV resistant.
- Protects the surface against water, rain, sunlight.
- Resistant to mechanical loads, abrasion and chemicals.
- Provides water impermeability on applied all horizontal and vertical applications.
- Covers surface cracks and defects.
- Used on wet volumes such as terrace, balcony.
- Easy to clean, quick dry and dust-free.
- Long working time, protects elasticity and color.
Preparation of Substrate
The application surface must be durable, dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. The residual moisture content of the substrate must not exceed 4%. Big pores and cracks should be repaired with suitable BAUMERK repair mortar. Before applying PU TOP 210, the substrate should be primed with appropriate BAUMERK primers.
Prior to mixing, stir part A and B separately with a mechanical drill at a very low speed. B component is poured into A component under low speed mixer, they are mixed together during 3 minutes until there remains no lump, getting homogenous mixture. After the mixing, prepared mixture can be applied on a surface, which is already primed with appropriated BAUMERK primer, with a brush, roller or spray gun. Mixture must be used within 40 minutes. Maximum 100 micron wet film thickness have to be applied for each layer. Two coats application is sufficient. Depending on the weathering conditions, second layer should be applied 2 hours later.
0,200 - 0,500 kg/m² for each layer.
A component + B component = 30 kg set
Polyurethane Based, Waterproofing Material for Potable Water Tanks - POLIXA 2
Elastomeric Acrylic Resin Based, UV Resistant, Elastic Waterproofing Material - WHITECOAT
Hybrid-Polymer Based, One Component, Waterproofing Material - HYBRID 120
Polyurethane Based, UV Resistant, One Component, Waterproofing Material - PUR 625
Hybrid Polyurea - PUR 410
UV Resistant, Acrylic-Based, Waterproofing and Heat Insulation Material - SOLARCOAT
Water Based, Transparent Waterproofing and Impregnating Material - TRANSCOAT
Polyurethane Based, Bitumen Modified, Single Component, Liquid Waterproofing Material - PU-B 1K
Invisible Water Repellent and Surface Impregnating Material - SILOX
Polyurethane Based, Two Component, Aliphatic Top Coat - PU TOP 210
Standard Pure Polyurea - PUR 425
Elastomeric Resin Based, UV Resistant, Super Elastic Waterproofing Material - WHITECOAT SP
Modified Pure Polyurea - PUR 426
Polyurethane Based, Transparent, Waterproofing Material - PUR 115
Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115
Polyurethane - Bitumen Based, Two Component, Liquid Waterproofing Material - PU-B 2K
Acrylic Based, Multipurpose Primer - SPR 104
One Component, Polyurethane Concrete Primer - PU 101 A