Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115

Hybrid Polymer Based, One Component, Transparent Waterproofing Material - HYBRID 115

Description

HYBRID 115 is a hybrid-polymer based, applicable from negative and positive directions, one component, transparent solvent free waterproofing material. HYBRID 115 is a UV resistance, crack bridging property coating material that can be applied even wet surfaces, without primer.

Fields of Application

Features and Benefits

Technical Data

Content

 : Hybrid Polymer

Color

 : Transparent

Density

 : 1,10 g/cm3

Viscosity

 : 900-1500 cPas

Elongation at Break

 : %100 (BS 2782-3)

Tensile Strength

 : 5 N/mm² (DIN 53504)

Shore A Hardness

 : 83 (DIN 53505)

Elasticity at Thermal Changes

 : -40°C - +80°C

Water Vapor Permeability

 : 1 m

Crack Bridging

 : 2 mm

Water Absorption

 : <1%

Film Formation Time

 : 45 minutes

Curing Time

 : 24 hours

Full Curing

 : 7 days

HS Code


Application Procedure

Preparation of Substrate

Surface must be clean off materials which prevent adhesion such as dust, oil etc. Application surface must be sound and surface defects must be repaired. Smooth, gloss or/and nonabsorbent surfaces must be roughened. On ceramic surface application, material adhesion performance must be checked on surface before the application, the sound of joint material must be checked and if needed they must be repaired. Wall floor joints must be chambered.

Application Method

Material is ready to used. Application is done with using brush, roller or airless spray gun at least two coats. Second coat must be applied perpendicularly after 12-24 hours later (be walkable on) on first coat.

Consumption

For concrete 1,0 kg/m²/mm

For ceramic 1,5 kg/m²/mm

For metal 1,0 kg/m²/mm

Packaging

1 kg plastic bucket

4,5 kg plastic bucket

15 kg metal pail

Shelf Life

12 months in original, unopened package.

Storage

Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.

Cleanup Information

Clean tools and equipment with detergent warm water immediately after use. Dried material can only be removed mechanically.

Cautions / Limitations

Health and Safety

Warning! Cause eye and skin irritation. If eye or skin contact, get immediate medical attention. If swallowed, do not induce vomiting. Call a physician or poison control center. Never give anything by mouth to an unconscious person.

Wash hands thoroughly after handling. Wear protective clothing, gloves, eye and face protection. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash it before reuse. Dispose of unused, contents, container and other contaminated wastes in accordance with local, state, federal and provincial regulations.

Keep container closed when not in use. Keep out of the reach of children.

Limited Warranty: This product is subject to a written limited warranty which can be obtained free of charge from BAUMERK Company. Please contact with technical service department for further information and support.

Related Products
Our Products
Contact Us
address
Dursunköy Mah. Uygur Cad. No:44 34555
Hadımköy - Arnavutköy - İstanbul / TÜRKİYE