EPOX 220 is an epoxy based, solvent free, two component installation and adhesive mortar with thixotropic behavior.
Preparation of Substrate
Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and removed loose pieces. Cracks and pores must be repaired with EPOX 220 or other BAUMERK repair mortars.
A and B components must be stirred under low speed mixture during 2-3 minutes until homogenous mixture is obtained.
To adhere dilatation tape; EPOX 220 is applied on both sides of the dilation approximately 1,5 mm thickness and 40 mm width by trowel or spatula. After lay the dilatation tape, EPOX 220 is applied on the front face and press until curing.
To adhere metal profile; EPOX 220 is applied on both side of the surface and press until curing.
To adhere ceramic, granite or marble plate; EPOX 220 is applied with using a notched trowel and plates are installed. Recent position must be set within 30 minutes.
Approximately 2 kg/meter for fixing dilatation tape.
A component: 3,75 kg + B component: 1,25 kg = 5 kg set