Polyurethane Based, Two Component, Aliphatic Topcoat Varnish - PUR 220 UV

Polyurethane Based, Two Component, Aliphatic Topcoat Varnish - PUR 220 UV


PUR 220 UV is a two component, aliphatic polyurethane based, interior and exterior top coat for concrete and metal surfaces, low viscosity, UV resistant, featuring a glossy surface appearance, self levelling varnish.

Fields of Application

Features and Benefits

Application Procedure

Preparation of Substrate

The application surface must be durable, dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. The residual moisture content of the substrate must not exceed 4%. Big pores and cracks should be repaired with suitable BAUMERK repair mortar. Surface preparation completed concrete surface should be primed with appropriate BAUMERK primers and epoxy or polyurethane application should be done, then PUR 220 UV will be ready for final coat application.


Prior to mixing, stir part A and B separately with a mechanical drill at a very low speed. B component is poured into A component under low speed mixer, they are mixed together during 3 minutes until there remains no lump, getting homogenous mixture. After the mixing, prepared mixture can be applied on a surface, which is already primed with appropriated BAUMERK primer, with a brush, roller or spray gun.


150-200 gr/m2 for each layer


A component 16 kg + B component 4 kg = 20 kg set

Related Products
Our Products
Contact Us
Dursunköy Mah. Uygur Cad. No:44 34555
Hadımköy - Arnavutköy - İstanbul / TÜRKİYE