Joint Sealants and Mastics / TPE Based, Elastic Dilatation Tape
TPE FLEX is highly elastic dilatation tape used for insulation of dilatation gaps, thermal expansion joints and cracks.
Fields of Application
- In all dilatation of buildings, both horizontal and vertical installations.
- In basements and curtain walls under the land.
- In waste water, potable water tanks and pools.
- In tunnel and culverts.
- Raft foundation - curtain wall, curtain wall-curtain wall joints waterproofing.
Features and Benefits
- Protects its elasticity under low and high temperatures (between -40°C to +80°C).
- Excellent adhesion performance.
- Resistant to plant root.
- Resistant to UV lights.
Preparation of Substrate
The application area must be durable, sound, dry, clean and clean off dust, dirt, rust, oil and all contaminants. Surface defects should be repaired by EPOX 220, REPAMERK 1 cement based repair mortar or EPOX 310 epoxy repair mortar.
A and B components of EPOX 220 must be stirred under low speed mixture during 2-3 minutes until homogenous mixture is obtained. Then applied on both sides of the dilation approximately 1/1,5 mm thickness and 40/50 mm width by trowel or spatula. Dilatation tape is cut in suitable sizes. Inset parts overlap and pasted with hot air gun. Before first floor epoxy adhesive get dry, dilatation tape is applied by using pressure on the epoxy. Second floor epoxy adhesive is installed as 1/1,5mm thickness after first floor get dry. During this time be careful of putting epoxy adhesive into the middle of the dilatation band. Do not move TPE FLEX expansion tape until epoxy adhesive get dry and protect it against water and mechanic impacts. Adhesive dry time could be change according to the warm and cold weather conditions. If conditions are under +5°C do not make installation.
Depends on application area.
Bituminous Waterproofing and Adhesion Mastic for Wet Areas - BMAST WF 310
Acrylic Polymer Based, Swelling Waterstop - SWELLBAND A
Bitumen-Neoprene Based, Joint Paste - NPR 2
Polyurethane Based, Self Levelling Joint Sealant - PU 2K 263
Epoxy Based, Two Component, Adhesive Mortar - EPOX 220
Polyurethane-Coal Tar Based, Two Component, Joint Sealant - PUK 401
Bituminous Waterproofing and Adhesion Mastic - BMAST DF 310
Polyurethane-Bitumen Based, Two Component, Joint Sealant - PUB 401
TPE Based, Elastic Dilatation Tape - TPE FLEX
Polyurethane Based, One Component, Joint Sealant - PUMAST 600
Bentonite Based, Swelling Waterstop - SWELLBAND
Bitumen-Rubber Based, Hot Applied, Joint Filler - BMAST 100
Hybrid Polymer Based Sealant and Adhesive - SUPER TACK 290
Primer for Polysulphide Based Materials - PS PRIMER
Polysulphide Based, Two Component, Pouring Grade Joint Sealant - JOINTPAST PS-H
Bituminous, Elastic Waterstop Tape - FLEXBIT
Polysulphide Based, Two Component, Gun Grade Joint Sealant - JOINTPAST PS-V
Bitumen Based, Elastic Fillet Tape - PH 55