EPOX 310 is an epoxy based, 3 component, solvent free repairing and filling mortar with contain special aggregate.
Preparation of Substrate
Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Appropriate BAUMERK primers should be applied before the application if needed.
Component A and B are mixed under low speed mixer for 3-4 minutes, then component C is poured into the mixture and all of them mix for 3-5 minutes until obtaining homogenous mixture. Mixture must be applied in 60 minutes. Mixture should be applied on the surface with using a trowel as obtained maximum 50 mm thickness. Depending on the weather conditions 10-48 hours should be waited before layers. The product would be completely cured in minimum 7 days. During the application, ambient and surface temperatures should be between +10⁰C and +30⁰C. It is not recommended to application on rainy, windy and frost days. After application, the material should be protected from direct contact with water for a minimum of 24 hours.
1,70 kg/m² for 1 mm thickness
A component: 1,66 kg + B component: 0,86 kg + C component: 17,51 kg = 20 kg set