SCHOUBIT W is a bitumen-rubber modified, water-based, ready-to-use, reinforced with elastomeric polymer resin additives, single-component liquid coating used against water and moisture. By the evaporation of the water it contains, it adheres firmly to the applied surface and forms an elastic waterproof layer.
Preparation of Substrate
The application surface should be without dust, rust, dirt, grease and oil. The loose parts should be scrapped out. B PR 101 bitumen emulsion on concrete surfaces and B PR 102 on metal surfaces can be used as primer to ensure good adhesion. The sharp corners should be rounded and horizontal-vertical joints should be angled with PH 55. The large pores and the cracks should be repaired with REPAMERK 301 repair mortar.
SCHOUBIT W is a cold applied and ready to use material, it do not need to dilution. After mixing, it can be applied with a bitumen brush, airless pump or trowel. Depending on weather conditions, it dries in approximately 5-6 hours. It should not be applied in rainy weather, and when the temperature below +5°C. Next layer should be applied on dry layer.
0,80 -1,0 kg/m² for each layer. Recommended at least 2 layers application.
17 kg metal pail
200 kg drum